Verification of Measuring Means

Major: Information Technologies in Instrument Engineering
Code of subject: 7.152.05.O.001
Credits: 6.00
Department: Measuring Information Technologies
Lecturer: Ivakhiv Orest Hamula Pavlo
Semester: 1 семестр
Mode of study: денна
Мета вивчення дисципліни: The discipline "Verification of measuring equipment" is one of of the main professional disciplines of professional and practical master's training in specialty 152 "Metrology and information-measuring technology". The purpose of teaching the discipline is to have students study modern methods and means of verification (metrological verification) of measuring equipment (MET), acquiring the ability to carry out a measurement experiment and work it out results on establishing compliance of the MET being checked with the requirements regulatory documents (RD) and applicability.
Завдання: The study of an educational discipline involves the formation of education seekers general competences: understanding of the cause-and-effect relationships of the development of society and their ability use in professional and social activities; basic knowledge of fundamental sections of mathematics and physics in scope, necessary for mastering the mathematical apparatus of the specialty "Metrology and information-measuring technology", the ability to use mathematical methods and physical effects in the chosen profession; basic knowledge in the field of informatics and modern information technologies; provision of social, natural and man-made security; the ability to collect, analyze and systematize scientific and technical information. professional competences: basic knowledge of basic concepts and terms of metrology and measuring technology, the organization of the metrological system in Ukraine in the field of MET verification; the main regulatory documents (RD) in the field of MET verification - technical regulations, standards, methods, legal acts, etc.; basic knowledge about units of quantities, their reproduction and storage, standards values; basic knowledge about methods of measurement and methods of verification of MET and methods of their implementation, ways of automating the procedure of verification of MET; basic knowledge about types of MET ??and their metrological haracteristics;
Learning outcomes: As a result of studying the discipline “Verification of Measuring Means” the students: • should know International Metrological Organizations, their functions and tasks; the structure of metrology system of Ukraine and its tasks of ensuring the uniformity of measurements in the field of verification (metrological checks) of measuring means; types of verification of measuring means; methodology of verification of measuring means; modern methods of the verification of measuring means and operating procedures of their realization; main methods of measurements and operating procedures of their realization; main technical regulations, standards and other regulated documents in the sphere of the measuring means verification; current state and prospects of the precision measuring means development to create new methods and techniques of their verification and calibration; • must be able to choose a method of verification of the given measuring instrument and necessary reference measuring means for the verification of measuring instrument; to match the established requirements of measuring instrument and its suitability for use; to make the evaluation of accuracy of verification results of measuring instrument to establish their authenticity. Current control 40 points Examination control (written part) 50 points Examination control (oral part) 10 pointsCurrent control 40 points Examination control (written part) 50 points Examination control (oral part) 10 points
Required prior and related subjects: • Fundamentals of Metrology and Measuring Technique • Principles and Means for Measurement of Electrical Quantities • Principles and Means for Measurement of Non-electrical Quantities; • Processing of the Measurement Results; • Analogue and Digital Measuring Instruments; • Designing of the Measuring Instruments.
Summary of the subject: The discipline "Verification of measuring equipment" is one of the main mandatory professional disciplines of professional and practical master's training in specialty 152 "Metrology and information and measuring equipment". The purpose of teaching the discipline is for students to study modern methods and means of verification (metrological verification) of measuring equipment (MT), to acquire skills carrying out a measuring experiment and working out its results in order to establish the compliance of the FTA, which is checked, with the requirements of regulatory documents and its suitability for use. The discipline "Verification of measuring equipment" consists of lecture course, laboratory practice, calculation and control work. The structure of the course "Verification of measuring equipment" and its teaching methodology are aimed, first of all, at the consideration of issues that are common to the verification of various types of MET intended for the measurement of various types of quantities of both an electrical and non-electrical nature, as well as issues related to the calibration of MET
Опис: The structure of metrology system of Ukraine. Means of the information-measurement technique. Methods of measurement. Methods of verification and calibration of measuring instruments. Evaluation accuracy of the results of verification and calibration of measuring instruments. Method of direct comparison of measuring instrument, which is checked, with the reference. Method of comparison of measuring instrument, which is checked, with the reference by using comparator. Method of measurement by checked measuring instrument of the quantity of reference measure. Method of measurement by reference measuring instrument of the quantity of checked measure. Verification and calibration of measuring transducers by measuring of their parameters by the reference measuring instrument. Method of indirect measurement of quantity which is corresponding to show of the measuring instrument which is checked. Method of autonomous verification and calibration of measuring instruments (without of direct using of standard means). Method of unit verification and calibration of measuring instruments. Presentation of the results of verification and calibration of measuring instruments.
Assessment methods and criteria: There are such methods of diagnosis and assessment in the process of teaching discipline “Verification of Measuring Means”: • current control of students knowledge – 40 %: a) during lectures; b) during laboratory classes; c) during tests; d) during checking works; • during semester exam – 60% (control task ; oral component ).
Критерії оцінювання результатів навчання: Current control 40 points Examination control (written part) 50 points Examination control (oral part) 10 points
Recommended books: 1. Regulations documents: 1. The Law of Ukraine “On Metrology and Metrological Activity”, №1314-VШ from 05.06.2014. - Kyiv: Parliament house Publication, 2014. - 22 p. 2. DSTU 2681-94. Metrology: Terms and Definition. State Standard of Ukraine. - Kyiv: 1994. - 68 p. 3. ISO/IEC DIS 17025:2016. General requirements for the competence of testing and calibration laboratories: Document published on: 2016-12. - 27 p. 4. International vocabulary of metrology: Basic and general concepts and associated terms (VIM3). JCGM 200:2012 (E/F). – 91 р. 5. Uncertainty of measurement - Part 3: Guide to the expression of uncertainty in measurement (GUM:1995). ISO/IEC Guide 98-3:2008. – 120 р. 6. EA-4/02 M: 2013. Evaluation of the Uncertainty of Measurement in Calibration: European Accreditation. - 2013. - 75 p. 2. Educational literature: 1. Motalo V. Verification of measuring instruments: Lectures for masters in the specialty “Metrology and Information-Measurement Technique” / V. Motalo. - Lviv: Publication house of Lviv National Polytechnic University. - 2017. - 99 p. 2. Fundamentals of metrology and measuring technique: Textbook for students of High Schools in two volumes/ M. Dorozhovets, V. Motalo, B. Stadnyk and others. – Ed. Professor B. Stadnyk. – Lviv: Publishing house of Lviv National Polytechnic University, 2005. – V.1. Fundamentals of metrology. - 532 p. 3. Fundamentals of metrology and measuring technique: Textbook for students of High Schools in two volumes / M. Dorozhovets, V. Motalo, B. Stadnyk and others. – Ed. Professor B. Stadnyk. – Lviv: Publishing house of Lviv National Polytechnic University, 2005. – V.2. Measuring Technique. - 656 p. 4. M.M. Dorozhovets. Processing of the Measurement Results: Handbook for students of High Schools / M.M. Dorozhovets. - Lviv: Publication house of Lviv National Polytechnic University. - 2007.-624p. 5. Fundamentals of metrology and electrical measurements: Handbook for students of High Schools / M. Dorozhovets, V. Motalo, B. Stadnyk and others. - Ed. Professor B. Stadnyk. - Lviv: Publication house of Lviv National Polytechnic University. - 2011. - 372 p. 6. Mykyjchuk M. Metrological checking of measuring instruments/ M. Mykyjchuk, P. Stolyarchuk - Lviv: Publication house “Rastr-7”. - 2015. - 245 p. 3. The literature for laboratory classes 1. Instructions for laboratory works on the course “Verification of Measuring Means”. 2. Fundamentals of metrology and electrical measurements: Handbook for students of High Schools / M. Dorozhovets, V. Motalo, B. Stadnyk and others. - Ed. Professor B. Stadnyk. - Lviv: Publication house of Lviv National Polytechnic University. - 2011. - 372 p.

Verification of Measuring Means

Major: Information Technologies in Instrument Engineering
Code of subject: 7.152.05.O.002
Credits: 6.00
Department: Department of Intelligent Mechatronics and Robotics
Lecturer: Orest Ivakhiv
Semester: 1 семестр
Mode of study: денна
Мета вивчення дисципліни: The discipline "Verification of measuring equipment" is one of the main professional disciplines of professional and practical master's training in specialty 152 "Metrology and information-measuring equipment". The purpose of teaching the discipline is for students to study modern methods and means of verification (metrological verification) of measuring equipment (MET), to acquire the ability to conduct a measuring experiment and to work out its results in order to establish the compliance of the tested MT to the requirements of regulatory documents (ND) and suitability for use
Завдання: The study of an educational discipline involves the formation of competencies in students of education: general competences: ? understanding of the cause-and-effect relationships of the development of society and the ability to use them in professional and social activities; ? basic knowledge of the fundamental sections of mathematics and physics to the extent necessary for mastering the mathematical apparatus of the specialty "Metrology and information-measuring technology", the ability to use mathematical methods and physical effects in the chosen profession; ? basic knowledge in the field of informatics and modern information technologies; ? provision of social, natural and man-made security; ? the ability to collect, analyze and systematize scientific and technical information. professional competences: ? basic knowledge of the basic concepts and terms of metrology and measuring technology, the organization of the metrological system in Ukraine in the field of FTA verification; ? main regulatory documents (ND) in the field of FTA verification - technical regulations, standards, methods, legal acts, etc.; ? basic knowledge about units of quantities, their reproduction and storage, standards of quantities; ? basic knowledge of measurement methods and methods of verification of FTAs and methods of their implementation, ways of automating the FTA verification procedure.
Learning outcomes: Learning outcomes in accordance with the educational program, learning and teaching methods, methods of evaluating the achievement of learning outcomes As a result of studying the academic discipline, the student must be able to demonstrate the following learning outcomes: - the ability to analyze the conditions of conducting a measurement experiment for the verification of the FTA, to choose the appropriate method and means of measurement and to conduct a measurement experiment for the verification of the FTA; - the ability to process the experimental data of the verification of the FTA, to draw a conclusion about the compliance of the FTA with the requirements of the ND, which regulate its metrological characteristics, and to draw up the relevant documents; - the ability to evaluate the accuracy of the results of FTA verification in order to establish their reliability
Required prior and related subjects: Previous academic disciplines 1 Basics of metrology and measuring technology 1 Metrological support of production 2 Methods and means of measuring electrical quantities 2 Design of measuring devices 3 Methods and means of measuring non-electric quantities 4 Processing of measurement results 5 Analog and digital measuring devices related and subsequent academic disciplines 1 Metrological support of production 2 Design of measuring devices
Summary of the subject: The discipline "Verification of measuring equipment" is one of the main mandatory professional disciplines of professional and practical master's training in specialty 152 "Metrology and information and measuring equipment". The purpose of teaching the discipline is for students to study modern methods and means of verification (metrological verification) of measuring equipment (MET), to acquire the ability to conduct a measuring experiment and to process its results in order to establish the conformity of the tested MT to the requirements of regulatory documents (ND) and its suitability for use . The discipline "Verification of measuring equipment" consists of a lecture course, a laboratory workshop, calculation work (for full-time students) and control work (for part-time students). The structure of the course "Verification of measuring equipment" and its teaching methodology are aimed, first of all, at the consideration of issues that are common to the verification of various types of METs intended for the measurement of various types of quantities of both electrical and non-electrical nature, as well as issues related to the calibration of METs: ¦ study and analysis of FTA verification methods, since the same method can be used to verify different types of FTA. For example, by the method of direct comparison of the tested test equipment with the reference one, the verification of direct evaluation measuring devices intended for measuring both electrical quantities - ammeters, voltmeters, wattmeters, etc., and non-electrical quantities - liquid and gas flow meters, manometers, viscometers, etc. .; ¦ study and analysis of measurement methods, since the same method of FTA verification can be implemented by using different measurement methods, which determines the methodology of processing FTA verification results and assessing their accuracy. For example, the method of comparing the FTA under test with the reference one with the help of a comparator can be implemented by using such measurement methods as the substitution method, the contrast method, the differential and zero methods; ¦ assessment of the accuracy of the results of the verification of the FTA and their reliability is carried out according to the method of calculating the uncertainty (uncertainty) of the measurement result in the procedure of verification and calibration of the FTA, which is calibrated, which corresponds to the modern trends in the development of world metrology. The material of the course "Verification of measuring equipment" can be used by students in the process of completing master's qualification works.
Опис: Purpose and tasks of the course "Verification of measuring equipment". Metrological system of Ukraine. Means of measuring technology Measurement methods. Methods of verification of measuring equipment Assessment of the accuracy and reliability of the results of the verification of measuring equipment. Establishing the conformity of measuring equipment based on the results of their verification Verification of measuring equipment by the method of direct comparison with reference means Verification of the means of measuring equipment by the method of comparison with reference means using a comparator. Verification of measuring devices by the method of direct measurement of the value reproduced by the reference measure. Verification of a digital thermometer with a resistive thermo-converter A method of measuring the quantity reproduced by the measure being tested. Verification of measuring equipment by the method of indirect measurements. Autonomous verification of measuring equipment. Measuring experiment. Measurement errors. Rules for rounding errors and measurement results. Recording of measurement results The method of processing the results of direct measurements with multiple observations with a normal distribution of errors of the results of individual observations. Establishing interval evaluations Hypothesis testing regarding the accuracy and correlation of groups of experimental data. Processing of the results of uneven measurements Calculation of error characteristics of mediated measurements with one-time observations. Expressions of errors of indirect measurements. Processing of errors in the results of indirect measurements with multiple observations Processing of the results of aggregate and compatible measurements. Formation of a system of normal equations by the method of least squares. Evaluation of the errors of the results of aggregate and compatible measurements Checking the stationarity of series. Development of time series of observations Testing of the hypothesis regarding the subordination of experimental data to the accepted distribution law
Assessment methods and criteria: Maximum score in points Current control (PC): 40 points Examination control (written part): 50 points Examination control (oral part):10 points Total for the discipline: 100 points
Критерії оцінювання результатів навчання: The evaluation of learning results is carried out in accordance with the quality and completeness of the tasks of current control, calculation-graphic, course, credit control, qualification works, as well as the defense of course and qualification works.
Порядок та критерії виставляння балів та оцінок: The procedure and criteria for assigning points and assessments 100–88 points – (“excellent”) is awarded for a high level of knowledge (some inaccuracies are allowed) of the educational material of the component contained in the main and additional recommended literary sources, the ability to analyze the phenomena being studied in their interconnection and development, clearly, succinctly, logically, consistently answer the questions, the ability to apply theoretical provisions when solving practical problems; 87–71 points – (“good”) is awarded for a generally correct understanding of the educational material of the component, including calculations, reasoned answers to the questions posed, which, however, contain certain (insignificant) shortcomings, for the ability to apply theoretical provisions when solving practical tasks; 70 – 50 points – (“satisfactory”) awarded for weak knowledge of the component’s educational material, inaccurate or poorly reasoned answers, with a violation of the sequence of presentation, for weak application of theoretical provisions when solving practical problems; 49-26 points - ("not certified" with the possibility of retaking the semester control) is awarded for ignorance of a significant part of the educational material of the component, significant errors in answering questions, inability to apply theoretical provisions when solving practical problems; 25-00 points - ("unsatisfactory" with mandatory re-study) is awarded for ignorance of a significant part of the educational material of the component, significant errors in answering questions, inability to navigate when solving practical problems, ignorance of the main fundamental provisions.
Recommended books: 1. Guide to the Expression of Uncertainty in Measurement (GUM): First edition. — ISO. 1993. - 101 р. 2. Метрологія. Застосування «Вказівок до подання непевності вимірювань»: ДСТУН РМГ 432006. [Чинний від 2007.01]. Київ: Держстандарт України, 2006. - 34 с. (Національний стандарт України). 3. Обозовський С.С. Теоретичні основи інформаційновимірювальної техніки / С.С. Обозовський // – Київ: НМК ВО, 1991. - 223 с. 4. Новицкий П.В. Оценка погрешностей результатов измерений / П.В. Новицкий, И.А. Зограф // Монография. Ленинград: Энергоатомиздат, 1991. – 304 с. 5. Володарский Є. Статистична обробка даних: Навч. посіб. / Є.Т. Володарский, Л.О. Кошевая // – Київ: НАУ, 2008. – 308 с. 6. Дж.Бендат, А.Пирсол. Прикладной анализ случайных данных – Москва: Мир, 1989. – 340 с. 7. Е.И.Пустильник. Статистические методы анализа и обработки наблюдений. – Москва: Наука, 1968. – 288 с. 8. Ван дер Ванден Б.Л. Математическая статистика. – Москва: Издательство иностранной литературы, 1960. – 340 с. 9. Орнатский П.П. Теоретические основы информационно измерительной техники / П. Орнатский // Киев: Вища школа, 1983. - 455 с. 10. Дорожовець М.М. Опрацювання результатів вимірювань / М. Дорожовець // Навч. посібник. – Львів: Видавництво Національного університету «Львівська політехніка», 2007. –624 с. 11. Davis J. ASM International. Tensile Testing, Second Edition / Edited by J.R. Davis // Materials Park, Ohio, USA, 2004. 279 р. 12. D 638 Test Method for Tensile Properties of Plastics. Annual Book of ASTM Standards, 2004. Vol 08.01. [Електронний ресурс] Режим доступу: http://classes.engr.oregonstate.edu/mime/winter2012/me453001/Lab1%20 %20Shear%20Strain%20on%20Polymer%20Beam/ASTM%20D63802a.pdf. 32 13. Бубела Іванна Василівна. Опрацювання результатів вимірювання при відхиленні їх статистичних властивостей від типових. Дисертація на здобуття наукового ступеня кандидата технічних наук за спеціальністю 05.01.02 – стандартизація, сертифікація та метрологічне забезпечення (УДК 006.91: 621.317) – Львів: 2016 14. Пономарьов П. Безпека харчових продуктів та продовольчої сировини: Навчальний посібник / Пономарьов П.X., Сирохман І.В. // К.: Лібра, 1999. 272 с. 15. Столярчук П. Упровадження систем контролю молочної продукції — запорука її якості та безпечності / П. Столярчук, О. Малик // Стандартизація, сертифікація, якість, 2011. — № 6. — с. 61 64. 16. Черевко О.І. Методи контролю якості харчової продукції: Навч. посібник для студ. вищих навч, закл. технол. спец. / О.І. Черевко, Л.М. Крайнюк, Л.О. Касілова, Л.Р. Димитрієвич, Ж.А. Крутовий, Л.Г. Зіборова. — Харків: ХДУХТ, 2005. — 230 с. 17. Попова Н.В. Контроль якості та безпеки продукції галузі / Попова Н.В., Мисюра Т.Г. // Курс лекцій для студ. напряму 6.051701 "Харчові технології та інженерія" ден. та заоч. форм навч. — К.: НУХТ, 2012. — 176 с. [Електронний ресурс] Режим доступу: http://library.nuft.edu.ua/ebook/file/102.02.pdf. 18. Gumbel E. Statistics of Extremes / E. J. Gumbel // New York: Columbia University Press, 1958. – 375 р. 19. Дорожовець М. Опрацювання результатів спостереження на основі наближеного методу порядкових статистик / М. Дорожовець, І. Попович // Вимірювальна техніка та метрологія. 2014. № 75. – с. 812.
Уніфікований додаток: Lviv Polytechnic National University ensures the realization of the right of persons with disabilities to obtain higher education. Inclusive educational services are provided by the Service of accessibility to learning opportunities "Without restrictions", the purpose of which is to provide permanent individual support for the educational process of students with disabilities and chronic diseases. An important tool for the implementation of the inclusive educational policy at the University is the Program for improving the qualifications of scientific and pedagogical workers and teaching and support staff in the field of social inclusion and inclusive education. Contact at: St. Karpinsky, 2/4, 1st floor, room 112 E-mail: nolimits@lpnu.ua Websites: https://lpnu.ua/nolimits https://lpnu.ua/integration
Академічна доброчесність: Academic integrity The policy regarding the academic integrity of the participants of the educational process is formed on the basis of compliance with the principles of academic integrity, taking into account the norms "Regulations on academic integrity at the Lviv Polytechnic National University" (approved by the academic council of the university on June 20, 2017, protocol No. 35).