Home/ Majors directory/Chemical Technology and Engineering/Chemical Technology and Engineering (курсовий проєкт)
Chemical Technology and Engineering (курсовий проєкт)
Major: Chemical Technology and Engineering
Code of subject: 6.161.11.E.071
Credits: 3.00
Department: Chemistry and Technology of Inorganic Substances
Lecturer: Heads of course work:
scientific and pedagogical workers of the department
Semester: 8 семестр
Mode of study: денна
Завдання: -
Learning outcomes: Know:
- Theoretical bases of technology of chemical production on the theme of course work;
- modern technologies of chemical production;
- designs and principles of modern equipment and equipment of chemical production;
- typical methods of chemical and technological calculations.
Be able:
- summarize the data obtained from laboratory studies and measurements, from the point of view of their significance, and correlate them with the corresponding theory;
- to select the appropriate technological equipment and graphically depict the technological process;
- to carry out calculations of technological processes.
Required prior and related subjects: • Inorganic chemistry.
• Physical chemistry.
• Processes and apparatuses of chemical manufactures.
• General chemical technology.
• Theoretical foundations of inorganic substances technology.
Summary of the subject: Coursework includes the following main sections:
1. Review of scientific and scientific literature on the topic of work.
2. The theoretical basis of the process.
3. Description of the technological scheme of production.
4. Material and thermal calculations of the process.
5. Calculation of basic equipment.
6. Conclusions.
7. References.
For course work with elements of scientific research:
1. Description of experiments: schemes of installations, methods of synthesis and research, reagents and materials.
2. Results of research and their discussion.
Опис: -
Assessment methods and criteria: Protect course work, containing an explanatory note and demonstration materials.
Критерії оцінювання результатів навчання: -
Recommended books: -
Chemical Technology and Engineering (курсовий проєкт)
Major: Chemical Technology and Engineering
Code of subject: 6.161.11.E.072
Credits: 3.00
Department: Chemical Technology of Silicate Materials
Lecturer: prof. Vakhula Yaroslav Ivanovych, prof. Lutsiuk Iryna Volodymyrivna, assos. prof. Borovets Zenon Ivanovych, assos. prof. Semehen Roman Ivanovych, assos. prof. Mahorivska Halyna Yaroslavivna
Semester: 8 семестр
Mode of study: денна
Завдання: Integral competence - the ability to solve complex specialized tasks and practical problems of chemical technologies and engineering, which involves the application of theories and methods of chemical technologies and engineering and are characterized by the complexity and uncertainty of conditions.
General competences:
1. Ability to apply knowledge in practical situations.
2. Knowledge and understanding of the subject area and understanding of professional activity.
3. Ability to communicate in the national language both orally and in writing.
4. Efforts to preserve the environment.
Professional competences:
1. Ability to design chemical processes taking into account technical, legislative and environmental constraints.
2. The ability to use modern materials, technologies and apparatus designs in chemical engineering.
3. Ability to draw up technical documentation in accordance with current requirements.
Learning outcomes: 1. Correctly use terminology based on the concept of chemistry, chemical technologies, processes and equipment for the production of chemical substances and materials based on them in professional activities.
2. To know and understand the mechanisms and kinetics of chemical processes, to use them effectively in the design and improvement of technological processes and apparatus of the chemical industry.
3. Develop and implement projects related to technologies and equipment of chemical industries, taking into account goals, resources, existing limitations, social and economic aspects and risks.
4. Understand the main properties of structural materials, the principles and limitations of their use in chemical engineering.
5. To use modern computing equipment, specialized software and information technologies to solve complex problems and practical problems in the field of chemical engineering, in particular, for calculations of equipment and processes of chemical production.
6. Conveying information, ideas, problems, solutions, own experience and arguments to specialists and non-specialists.
7. Collection, interpretation and application of data.
8. Ability to take responsibility for making and making decisions in unpredictable work and/or educational contexts.
9. Ability to continue learning with a significant degree of autonomy.
Required prior and related subjects: Technology and Equipment of Ceramics.
Technology and Equipment of Glass.
Technology and Equipment of Binding Materials, parts 1 and 2
Summary of the subject: Systematization, generalization, deepening of theoretical knowledge and formation of the skill of practical implementation of general principles of development of technological schemes, general calculations of the material-technological balance of production, selection and justification of the main technological parameters of the production of glass, ceramics and binding materials.
Опис: Technologies of wall ceramics. Technologies of glass products. Technologies of gypsum, lime, cement.
Selection of raw materials and methods of their technological processing. Calculation of the raw material mixture and its preparation. Production control.
Assessment methods and criteria: explanatory note and graphic material for the course project
Критерії оцінювання результатів навчання: final control (test): defense of the course project (100%)
Recommended books: 1. Yashchyshyn Y. М. Теhnоlоhіia sklа : pidruch. u 3-h cast. / Y. М. Yashchyshyn. – Lviv : Vydavnytstvo “Beskyd Bit”. – Ch. І : Fizyka і khimiia sklа. – 2008. – 204 s.; Ch. ІІ : Теhnоlоhіia sklianoi masy. – 2004. – 250 s.; Ch. ІІІ : Теhnоlоhіia sklianykh vyrobiv. – 2011. – 416 s. (in Ukrainian)
Pashchenkо О. О. Viazhychi mаtеrіаly : pidruch. / О. О. Pashchenkо, В. P. Serbin, О. О. Starchevskaа. – К. : Vyshcha shk., 1995. – 416 s. (in Ukrainian)
3. Viazhychi mаtеrіаly : Pidruchnyk / R. F. Runovа, L. Y. Dvorkin, О. L. Dvorkin, Yu. L. Nosovskyi – К. : Оsnоvа, 2012. – 448 s. (in Ukrainian)
4. Khоmеnkо О. S. Khimichnа tеhnоlоhіia keramiku tа vognetryviv / О. S. Khоmеnkо, Ya. І. Kоltsоvа. – Dnipropetrovsk : DVNZ UDKhTU, 2014. – 192 s. (in Ukrainian)
Chemical Technology and Engineering (курсовий проєкт)
Major: Chemical Technology and Engineering
Code of subject: 6.161.12.E.099
Credits: 3.00
Department: Organic Chemistry
Semester: 8 семестр
Mode of study: денна
Chemical Technology and Engineering (курсовий проєкт)
Major: Chemical Technology and Engineering
Code of subject: 6.161.12.E.100
Credits: 3.00
Department: Organic Products Technology
Lecturer: Reutskyy Viktor V.
Semester: 8 семестр
Mode of study: денна
Завдання: The ability to solve complex specialized tasks and practical problems of chemical technology and engineering, which involves the application of theories and methods of chemical technology and engineering
and are characterized by the complexity and uncertainty of conditions.
Ability to apply knowledge in practical situations.
Knowledge and understanding of the subject area and understanding of professional activity.
Ability to communicate in the national language both orally and in writing.
Efforts to preserve the environment.
Ability to design chemical processes taking into account technical, legislative and environmental constraints.
The ability to use modern materials, technologies and apparatus designs in chemical engineering.
Ability to draw up technical documentation in accordance with current requirements.
The ability to use professional knowledge and practical skills to solve specific tasks in the field of basic and fine synthesis technologies of organic substances.
Learning outcomes: Correctly use terminology based on the concept of chemistry, chemical technologies, processes and equipment for the production of chemical substances and materials based on them in professional activities.
To know and understand the mechanisms and kinetics of chemical processes, to use them effectively in the design and improvement of technological processes and apparatus of the chemical industry.
Develop and implement projects related to technologies and equipment of chemical industries, taking into account goals, resources, existing constraints, social and economic aspects and risks.
To understand the main properties of structural materials, the principles and limitations of their use in chemical engineering.
To use modern computing equipment, specialized software and information technologies to solve complex tasks and practical problems in the field of chemical engineering, in particular, for calculations of equipment and processes of chemical production.
Conveying information, ideas, problems, solutions, own experience and arguments to specialists and non-specialists.
Collection, interpretation and application of data.
Ability to take responsibility for making and making decisions in unpredictable work and/or learning contexts.
Ability to continue learning with a significant degree of autonomy.
Required prior and related subjects: Processes and equipment of chemical technology
General chemical technology
Theory of Chemical Processes of Organic Synthesis
Chemistry and technology of organic substances
Designing organic synthesis
Equipment manufactures chemicals
Summary of the subject: The purpose of the course project specialty is to learn how to develop and improve the work of various offices and workshop production of basic organic and petrochemical synthesis, simulate processes and calculate mathematically over. With personal computers.
In carrying out the project, students should be able to analyze the condition and operation of the main equipment, calculate material and heat balances and technological parameters of basic equipment, to address issues of complex use syrovany and intermediates as well as environmental issues.
Опис: 1. Material and heat balance branch pyrolysis of diesel fuel.
2. Material and heat balance of separation of ethane pyrolysis.
3. Material and heat balance branch dichloroethane pyrolysis.
4. Material and heat balance of separation of direct chlorination ethylene.
5. Material and heat balance branch oxidative chlorination of ethylene.
6. Material and heat balance CHHV receiving department.
7. Material and heat balance of the receiving department formaldehidvmistnyh gases.
8. Material and heat balance of the receiving department urea-formaldehyde resins.
9. Material and heat balance ambis synthesis division.
10. Material and heat balance polikarbatsynu department.
11. Material and heat balance polyacrylamide receiving department.
12. Material and heat balance separation of polymerization of ethylene.
13. Material and heat balance of separation of emulsion PVC.
14. Material and heat balance of the receiving department initiated NPCs.
15. Material and heat balance catalytic receiving department NPCs.
16. Material and heat balance of the receiving department ha.
17. Material and heat balance branch hydrogenation of benzene.
18. Material and heat balance branch oxidation of cyclohexane.
19. Material and heat balance of the receiving department adipic acid.
20. Material and heat balance of the receiving department of methanol.
21. Material and heat balance branch production of acetic acid.
22. Material and heat balance branch oxidative dehydrogenation of butene.
23. Material and heat balance of the receiving department etyltretbutylovoho ether.
Assessment methods and criteria: Semester control - test 100 points.
Критерії оцінювання результатів навчання: Semester control - test 100 points.
Recommended books: 1. Лебедев Н.Н. Химия и технология основного органического и нефтехимичеокого синтеза, М.,Химия, 1988.
2. Одабашян Г.В. Лабораторный практикум по химии и технологии ос¬новного органического и нефтехимического синтеза, М., Химия, 1982.
3. В.С.Тімофеєв, Л.А.Серафімов. Принципи технології основного орга¬нічного та нафтохімічного синтезу, М., Хімія, 1992.
4. І.І.Юкельсон Технологія основного органічного синтезу. Державне видавництво технічної літератури , Київ, 1960.
5. Юкельсон И.И. Технология основного органического синтеза, М., Химия, 1968.
6. Паушкин Я.Й. и др. Практикум по нефтехимическому синтезу., М., Химия, 1965.
7. Беркман Б.Е. Основы технологического проектирования производств органического синтеза. М., Химия, 1976.
8. Паушкин Я.М., Адельсон С.В., Вишнякова Т.П. Технология нефтехимического синтеза. Ч.І,II, М., Химия, 1973, 1975.
5. Реутський В.В., Іващук О.С., Івасів В.В. Технологічні схеми промисловості органічного синтезу. Електронний навчальний посібник з «Технологія продуктів органічного синтезу» для студентів спеціальності 8.05130102 «Хімічні технології органічних речовин». – ВНС ЛП (http://vns.lp.edu.ua/moodle/course/view.php?id=9771) – Зареєстровано НМУ НУ «Львівська політехніка» (№ Е41-216-6/2012 від 14.02.2012 р.) – 170 с.
Chemical Technology and Engineering (курсовий проєкт)
Major: Chemical Technology and Engineering
Code of subject: 6.161.12.E.101
Credits: 3.00
Department: Chemical Technology of Oil and Gas Processing
Lecturer: Prof. Oleh Hrynyshyn
Semester: 8 семестр
Mode of study: денна
Learning outcomes: Know the physical and chemical foundations of recycling oil and gas;
- know the characteristics of classical technologies of recycling processes oil and hydrocarbon gases; - be able to make the current scheme of refining the set of option for fuel; - be able to carry out calculations of material balances of primary and secondary processes of oil refining and hydrocarbon gases.
Required prior and related subjects: Technology refining of oil and gases
Summary of the subject: The theoretical background and the basic technology of thermal processes of oil refining (thermal cracking, visbreaking, coking, pyrolysis). The theoretical background and the basic technology thermocatalytic processes of oil refining (catalytic cracking, reforming, isomerization). Theoretical foundations and principles of the technology of hydrogenation processes of oil refining (Hydrotreating, hydrocracking). Processing oil refinery gases (GFU, AGFU, alkylation).
Assessment methods and criteria: -
Recommended books: 1. Братичак М.М., Гринишин О.Б. Технологія нафти та газу. – Львів: Вид-во НУ «ЛП», 2013.– 180 с. 2. Мачинський О.Я., Топільницький П.І. Гідрокрекінг.– Львів: Вид-во НУ «ЛП», 2011.– 348 с. 3. Смидович Е.В. Технология переработки нефти и газа. – М.: Химия, 1980.– 328 с. 4. Сарданашвили А.Г., Львова А.И. Примеры и задачи по технологии переработки нефти и газа. – М.: Химия, 1980.–256 с.
Chemical Technology and Engineering (курсовий проєкт)
Major: Chemical Technology and Engineering
Code of subject: 6.161.13.E.125
Credits: 3.00
Department: Chemical Engineering
Semester: 8 семестр
Mode of study: денна
Chemical Technology and Engineering (курсовий проєкт)
Major: Chemical Technology and Engineering
Code of subject: 6.161.13.E.126
Credits: 3.00
Department: Chemical Technology of Plastics Processing
Lecturer: assoc. prof. V. Krasinskyi
Semester: 8 семестр
Mode of study: денна
Завдання: The study of an educational discipline involves the formation of competencies in students of education:
general competences:
1. Ability to use knowledge in practical situations.
3. The ability to learn, to perceive the acquired knowledge in the subject area and to integrate it with the existing ones.
4. Ability to plan and manage time.
5. Ability to system thinking, production of new ideas, creativity.
9. The ability to work independently and in a team, the ability to communicate effectively on professional and social levels.
10. The ability to analyze and synthesize, the ability to identify, formulate, set and solve scientific (scientific and applied) tasks.
13. Determination and perseverance in the performance of the assigned tasks and responsibility for the quality of the work performed.
professional competences (FC):
1. Ability to demonstrate knowledge and understanding of basic facts, concepts, principles and theories related to chemistry.
2. Basic ideas about the variety of objects of chemical technology, industry, chemical products.
8. Ability to choose and use appropriate equipment, tools and methods for implementation and control of chemical production.
11. Ability to use theoretical knowledge, practical skills and abilities to master the basics of theory and methods of chemical and technological research.
12. Ability to use theoretical knowledge, practical skills and abilities to analyze, evaluate and design technological processes and equipment using traditional and alternative raw materials.
Learning outcomes: • know the basic terms used in this discipline;
• schematic diagrams and work equipment used in the processes of formulation;
• general description, schematic diagram and hydraulic press work;
• design, key elements and activities press-form mold work;
• choice of hydraulic press for the manufacture of the product;
• circuit screw injection machine modes, basic units and their purpose;
• general scheme, the basic elements and the work of injection form;
• range of machines for making product;
• the main differences from injection molding mashine from thermosettings mashine;
• schematic diagram and work of screw extruder and two screw extruder and installations on their base;
• machinery and equipment for molding products from sheet and film thermoplastic materials by pneumatic-vacuum forming;
• extrusion-blow molding;
• Initial data for calculation and design of production facilities;
• Technological scheme development of manufacturing and main construction solutions.
Required prior and related subjects: • Engineering graphics
• Mechanics chemical production
• Plastics processing technology
• Materials science
Summary of the subject: Equipment for the formulation process. Grinding. Machines for shredding. Mix. Agitators. Drum and shovel mixers. Mixers with mechanical fluidization. Screw mixers. Tabletting machines. Schematic diagrams, work and performance mashines.
Equipment and devices for drying and preheating polymers.
Hydraulic press. Schematic diagrams, basic knots of timeline, the selection of hydraulic presses for the plastic products manufacturing. Total construction work and mold. Molding machines. The principal scheme, the basic units of injection machines. The choice of molding machines for making plastic products. Total construction work and forms for injection molding of thermoplastics. Extrusion machines and installations. Schematic diagram of the basic components and work horizontal screw extruder. Scheme of extrusion head. Units and extrusion lines based on screw extruders. Equipment and equipment to form products from sheet and film thermoplastic materials by pneumatic-vacuum formation. The composition, procedure development, coordination and approval of construction documents.
Fundamentals of production and processing of polymeric composite materials. General Information.
Опис: Theme of the course project
Assessment methods and criteria: - explanatory note;
- 2 sheets of drawing;
- protection of the course project
Критерії оцінювання результатів навчання: 100 points
Порядок та критерії виставляння балів та оцінок: 100–88 points – (“excellent”) is awarded for a high level of knowledge (some inaccuracies are allowed) of the educational material of the component contained in the main and additional recommended literary sources, the ability to analyze the phenomena being studied in their interrelationship and development, clearly, succinctly, logically, consistently answer the questions, the ability to apply theoretical provisions when solving practical problems; 87–71 points – (“good”) is awarded for a generally correct understanding of the educational material of the component, including calculations, reasoned answers to the questions posed, which, however, contain certain (insignificant) shortcomings, for the ability to apply theoretical provisions when solving practical tasks; 70 – 50 points – (“satisfactory”) awarded for weak knowledge of the component’s educational material, inaccurate or poorly reasoned answers, with a violation of the sequence of presentation, for weak application of theoretical provisions when solving practical problems; 49-26 points - ("not certified" with the possibility of retaking the semester control) is awarded for ignorance of a significant part of the educational material of the component, significant errors in answering questions, inability to apply theoretical provisions when solving practical problems; 25-00 points - ("unsatisfactory" with mandatory re-study) is awarded for ignorance of a significant part of the educational material of the component, significant errors in answering questions, inability to navigate when solving practical problems, ignorance of the main fundamental provisions.
Recommended books: 1. Revyako M.M., Kasperovich O.M. Oborudovaniye i osnovy proyektirovaniya predpriyatiy po pererabotke plastmass. /Ucheb. posobiye. - Mn.: BGTU, 2005. - 344 s.
2. Pererabotka plastmass./ Shvarts O., Ebeling F.V., Furt B.; pod. obshch. red. A.D. Panimatchenko. - SPb.: Professiya, 2005. — 320 str.
3. V.A. Pakharenko, R.A. Yakovleva, A.V.Pakharenko. Pererabotka polimernykh kompozitsionnykh materialov – Izd. komp. “Volya”, 2006 – 552 s.
4. Olenev B.A., Mordkovich Ye.M., Kaloshin V.F. Proyektirovaniye proizvodstv po pererabotke plasticheskikh mass. M.: Khimiya, 1982. - 256 s.
Уніфікований додаток: Lviv Polytechnic National University ensures the realization of the right of persons with disabilities to obtain higher education. Inclusive educational services are provided by the Service of accessibility to learning opportunities "Without restrictions", the purpose of which is to provide permanent individual support for the educational process of students with disabilities and chronic diseases. An important tool for the implementation of the inclusive educational policy at the University is the Program for improving the qualifications of scientific and pedagogical workers and educational and support staff in the field of social inclusion and inclusive education. Contact at:
St. Karpinsky, 2/4, 1st floor, room 112
E-mail: nolimits@lpnu.ua
Websites: https://lpnu.ua/nolimits https://lpnu.ua/integration
Академічна доброчесність: The policy regarding the academic integrity of the participants of the educational process is formed on the basis of compliance with the principles of academic integrity, taking into account the norms "Regulations on academic integrity at the Lviv Polytechnic National University" (approved by the academic council of the university on June 20, 2017, protocol No. 35).