Master’s Thesis Preparation

Major: Machines and Packaging Technologies
Code of subject: 7.131.04.O.020
Credits: 18.00
Lecturer: Kuzio I.V., Borovets V.M., Sholoviy Yu.P., Lanets O.S., Gursky V.M., Korendiy V.M., Dmyterko P.R., Gurey V.I., Kachur O. Yu., Zelinsky I.D., Gavrilchenko O.V., Maherus N.I.
Semester: 3 семестр
Mode of study: денна
Learning outcomes: As a result of performing a master's qualification the student must know: - structural and functional features of various transport and technological equipment; - procedures of structural, kinematic and power analysis of executive mechanisms of technological equipment; - peculiarities of calculating individual parts of machines for durability, endurance, rigidity, resistance to fire, etc .; - the basis of technologies of processing and manufacturing of machine parts; - methods and technologies of installation, operation, maintenance, and repair of various transport and technological equipment; - methods and techniques of modeling of technical systems, staging of experiments, analytical and numerical processing of scientific research results. As a result of the implementation of a bachelor's qualification, the student must be able to: - to analyze structural and functional features of various transport and technological equipment; - to develop basic, structural, kinematic and electrical circuits of equipment; - develop cyclograms of work of equipment for coordination of work of all knots and mechanisms; - carry out calculations of machine parts and mechanisms; - perform kinematic, dynamic and power analysis of executive mechanisms of technological machines; - to develop technological processes of manufacture of parts and assembly units; - to conduct a feasibility study on the feasibility of introducing new developments in the production and modernization of existing equipment; - to analyze technological equipment from the point of view of occupational safety and safety; - to model and explore various technical systems, carry out experiments, carry out analytical and numerical work on the results of scientific research.
Required prior and related subjects: Pre-requisites: - Theoretical mechanics; - The theory of machines and mechanisms; - Strength of Materials; - Machine parts; - Electrical engineering; - Electronics and microprocessor technology; - Technology of structural materials; - Materials science; - Descriptive geometry, engineering and computer graphics; - Basics of automated designing; - Interchangeability, standardization and technical measurements; - Technological foundations of mechanical engineering; - Hydropneumatic equipment; - Machines and equipment industry; - Operation and maintenance of machines; - Fundamentals of economy; - Basics of labor protection; - Systems of 3-D simulation; - Computer modeling and automation of engineering calculations; - Systems of mathematical and simulation modeling; - Automated design of technological equipment; - Modeling processes and systems.
Summary of the subject: Master's qualification work is a research work performed by a student under the direction of a lecturer of a department on a chosen theme, approved in the established order. The purpose of the work is to check the degree of professional training at this stage of training, its skills and skills to independently solve the design and engineering research tasks of the application plan based on a specific technical task. Structure and content of master's qualification work: 1. Introduction, which reveals the essence and state of the scientific problem (task) and its relevance, describes the purpose and objectives of research, scientific novelty and practical significance of the results obtained. 2. The main part in which the review of information sources on the subject and the choice of research areas; presentation of general methodology and basic research methods; conducted theoretical and (or) experimental studies; analysis and synthesis of research results. 3. Conclusions, in which the most important scientific and practical results obtained in the master's qualification work, which should contain the formulation of the solved problem (task), its importance for science and practice, are presented.
Assessment methods and criteria: When evaluating the qualification work on the results of public defense, the level of theoretical, scientific and practical training of the Higher Education Officer, as well as the assessment of the supervisor and the reviewer is taken into account. Assessment of the qualification work qualification The higher education qualifier is based on a national scale with a 100-point scale (based on the average interval value of the assessment scale at the university) as follows: "Excellent" - 94 points; "good" - 80 points; "satisfactory" - 60 points; "unsatisfactory" - <50 points.
Recommended books: 1. Анурьев В.И. Справочник конструктора-машиностроителя: в 3-х т. - М.: Машиностроение, 1980. - 467 с. 2. Павлище В.Т. Основи конструювання та розрахунок деталей машин / В.Т. Павлище. – Львів: Афіша, 2003. – 560 с. 3. Бурляй Ю.В., Сухой Л.А. Оборудование для укладки и упаковки штучных изделий в тару. - М.: Машиностроение. 1975. - 280 с. 4. Волчков И.И, Автоматы для фасовки и упаковки молока и молочных продуктов. — М.: Пищ. пром-сть, 1977. - 125 с. 5. Гавва О.М., Беспалько А.П., Волчко АЛ., Кохан O.Г. Пакувальне обладнання: Підручник. - К.: 1АЦ "Упаковка", 2010. - 744 с. 6. Гавва О.М., Беспалько А.П., Волчко АЛ. Пакувальне обладнання. Обладнання для групового пакування. -К.: ІАЦ "Упаковка", 2007. - 136 с. 7. Гавва О.М., Беспалько А.П., Волчко А.І. Пакувальне обладнання. Обладнання для пакування продукції у споживчу тару. - К.: ІАЦ "Упаковка", 2008. - 436 с 8. Гавва О.М., Беспалько А.П., Волчко А.І. Пакувальне обладнання. Обладнання для обробки транспортних пакетів. - К.: ІАЦ "Упаковка", 2006. -96 с. 9. Исполнительные механизмы машин - автоматов для упаковки изделий: Справ. / В.А. Благодарский, М.С. Зиновьева. Н.С. Хатенцева. - М.: Машиностроение, 1980. - 320 с. 10. Кононюк А.Е., Басанько В.А. Довідник конструктора обладнання харчових виробництв. - К.: Техніка, 1981. - 320 с 11. Красов Б.В. Монтаж и ремонт оборудования предприятий молочной промышленности. - М.: Пищ. пром-сть, 1973. - 305 с. 12. Марчевський В.М. Конструкторська документація курсових і дипломних проектів: Навчальний посібник. - К.: Норіта-плюс, 2006. - 280 с. 13. Машины для фасования пищевых жидкостей в бутылки / Ц.Р. Зайчик, В.А. Трунов, В.К. Яшин. - М.: Агропромиздат, 1989. - 239 с 14. Никитин B.C., Бурашников Ю.М. Охрана труда на предприятиях пищевой промышленности. - М.: Агропромиздат, 1991. — 350 с. 15. Орлов П.И. Основы конструирования: Справ. - метод, пособ.: В 2-х кн. - М: Машиностроение, 1988. 16. Основы расчета и конструирование заверточных и укладочных автоматов / Б.Е. Бройдо, Ю.В. Бурляй, Ф.Г. Рафаильский и др. - М.: Машиностроение, 1969. - 208 с. 17. Пакетоформирующие машины / А.П. Кривопляс, А,А, Кукибный, А.П. Беспалько и др. - М.: Машиностроение, 1982. - 239 с. 20. Погрузочно-разгрузочное и транспортное оборудование в перерабатывающей промышленности: Справ./А.И. Соколенко, Й.И. Сторижко, В.П. Яресько и др. - К.: Урожай, 1990-150 с. 21. Погрузочно - разгрузочные и транспортные операции на линях разлива пищевых продуктов / А.И. Соколенко, М,И. Юно, А.И. Ковалев и др. -М.: Агропромиздат, 1986. - 175 с. 22. Ридэль А.Э., Ридэль Э.И. Пакетоформирующие и пакеторазборные машины-автоматы. - М.: Машиностроение, 1969. - 109 с. 23. Современное оборудование для упаковки пищевых продуктов / Ю.В. Бурляй, Л.А. Сухой, В.Ю. Жидонис и др. - М.: Пищ. пром.- сть, 1978. -240 с. 24. Соколенко АЛ. Моделювання процесів пакування / АЛ. Соколенко, В.Л. Яровий. Підручник. - Вінниця: Нова книга. - 2004. - 272 с. 25. Соколенко А.И. Справочник специалиста пищевых производств / А.И. Соколенко, А.И.Украинец, В.Л.Яровой и др. Справочник. - К.: АртЭк. -2001. - 304 с. 26. Соколов В.И. Основы расчёта и конструирование машин и аппаратов пищевых производств. - М.: Машиностроение. - 1983. - 447 с. 27. Термінологічний словник пакувальника / Сторіжко ИЛ., Гавва О.М., Беспалько А.П., Волчко АЛ. Київ: ІАЦ "Упаковка", 1999. - 80 с. 28. Харламов СВ., Шувалов В.М. Автоматическая расфасовка пластичных пищевых продуктов. - М.: Пищ. пром-сть, ] 969. - 115 с. 29. Харламов СВ. Конструирование технологических машин пищевых производств: Учебн. пособие для вузов. - Л.: Машиностроение. 1970. - 224 с. 30. Чернов М.Е. Упаковка сыпучих продуктов: Учебное пособие. -М.: ДеЛи, 2000. -163 с. 31. Підйомно-транспортні машини: Розрахунки підіймальних і транспортувальних машин: Підручник / В.С. Бондарєв, О.І. Дубинець, М.П. Колісник та ін. – К.: Вища шк., 2009. – 734 с. 32. Кузьо І. В. Теоретична механіка: підруч. для студ. вищ. техн. навч. закл. / За заг. ред. І. В. Кузьо. – Харків : Фоліо, 2017. – 780 с. 33. Кіницький Я. Т. Теорія механізмів і машин: Підручник. – К.: Наукова думка, 2002. - 660 с. 34. Писаренко Г.С. Опір матеріалів / Г.С. Писаренко, О.Л. Квітка, Е.С. Уманський. – К.: Вища школа, 2004. – 655 с. 35. Малащенко В.О. Деталі машин. Збірник завдань та прикладів розрахунків / В.О. Малащенко, В.Т. Павлище. – Львів: Видавництво «Новий Світ – 2000», 2009. – 136 с.