Home/ Majors directory/Technologies of Orthopedic And Rehabilitation Products For Medical Purposes/Systems of Automated Design and Construction of Biomedical Products and Equipment for Their Manufacture
Systems of Automated Design and Construction of Biomedical Products and Equipment for Their Manufacture
Major: Technologies of Orthopedic And Rehabilitation Products For Medical Purposes
Code of subject: 7.163.04.E.017
Credits: 3.00
Department: Chemical Technology of Plastics Processing
Lecturer: Associate Professor, Doctor of Technical Sciences, Grytsenko Oleksandr Mykolayovych
Semester: 2 семестр
Mode of study: денна
Завдання: The study of an educational discipline involves the formation of competencies in students of education:
integral competence: The ability to solve complex specialized tasks and practical problems in the field of orthopedic technology and engineering during professional activity or in the learning process, which involves conducting research and/or implementing innovations and is characterized by uncertainty of conditions and requirements.
general competences:
- KZ1. Ability to abstract thinking, analysis and synthesis.
- KZ2. Ability to search, process and analyze information from various sources.
- KZ3. Ability to identify, pose and solve problems.
- KZ4. Ability to work in a team.
- KZ5. Ability to work in an international context.
special competences:
- CS1. Ability to solve complex problems of biomedical engineering using methods of chemistry, mathematics, natural and engineering sciences. To design medical systems for various purposes and prostheses with qualitatively new indicators using new modern technologies.
- CS3. The ability to analyze complex medical-engineering and bioengineering problems and carry out their formalization to find quantitative solutions using modern mathematical methods and information technologies. To participate in research activities in solving engineering and scientific problems in the development of experimental models and samples of prosthetic and orthopedic products.
professional competences of a professional direction:
- FCS1.2. Ability to learn and apply new methods and tools for analysis, modeling, design and optimization of orthopedic and medical rehabilitation products.
- FCS1.3. The ability to master the skills of working with the most common computer program packages and use them to solve practical tasks in the field of professional activity.
- FCS 1.4. The ability to learn and apply new methods and tools of analysis, modeling and design for the fitting and adjustment of orthopedic and medical rehabilitation products for a specific user.
Learning outcomes: As a result of studying the academic discipline, the student must be able to demonstrate the following learning outcomes:
PR1. To design, construct and improve biotechnical systems and prosthetic and orthopedic products of various purposes in compliance with technical requirements, as well as to accompany their operation.
COM. Clear and unambiguous presentation of one's own knowledge, conclusions and arguments to specialists and non-specialists, in particular, to students.
AiV 1. Management of work or learning processes that are complex, unpredictable and require new strategic approaches.
AiV 2. Responsibility for the contribution to professional knowledge and practice and/or evaluation of the results of the activities of teams and collectives.
AiV 3. Ability to continue learning with a high degree of autonomy.
Required prior and related subjects: Multidisciplinary teams.
Human biomechanics.
Human pathology and rehabilitation
Research and modeling of prosthetic and orthotic systems.
Technology of prosthetics and limb orthoses.
Summary of the subject: While studying the discipline "Systems of automated design and construction of products for biomedical purposes and equipment for their formation", students gain knowledge of the basics of designing plastic products for biomedical purposes and the construction of forming tools for their manufacture.
The discipline consists of three parts, the material of which is covered in the lecture material and worked out in practical classes.
The first part is devoted to the construction of plastic products for biomedical purposes, the classification of plastics, methodical bases of polymer selection, issues of accuracy and quality of products, determination of their strength and durability are presented.
In the second part, the structure, operation, design features and basics of designing equipment for manufacturing products using the methods of injection molding, pressing, thermoforming and pouring into molds are covered.
The material of the third part introduces students to the types of CAD and the basics of designing plastic products and equipment for their manufacture using graphic automated design systems.
The material of the discipline can be used during course and diploma projects.
Опис: Plastics as structural materials for manufacturing biomedical products. Classification by purpose. Classification criteria according to operational properties. Stages of work on the use of plastic masses for the manufacture of biomedical products. Methodical bases for choosing plastics for the manufacture of biomedical products.
Processing of plastic products for manufacturability. Analysis of structural elements of plastic products in order to ensure optimal manufacturability and necessary operational properties of products.
Accuracy and quality of plastic products. Basics of interchangeability. Admissions and landings.
Forms for pressing. Purpose, structure and principle of action of forms for compression pressing. Stationary casting molds, typical construction, mold details, mold operation, design basics.
Molds for injection molding. Purpose, structure and principle of operation, basics of design
Peculiarities of designing equipment for obtaining products by the method of thermoforming from sheets.
Equipment for forming products from polymer and composite materials by pouring.
The design process considering the possibility of its automation. CAD classification. Using CAD. CAD in the design of equipment for processing plastics into biomedical products.
Assessment methods and criteria: Oral and written surveys during practical classes, control and current testing in the Virtual Learning Envirorment, examination testing, oral survey during the exam.
Критерії оцінювання результатів навчання: Current control (written and oral control) – 30 points
Examination control:
written component - 60 points
oral component - 10 points
Порядок та критерії виставляння балів та оцінок: 100–88 points – (“excellent”) is awarded for a high level of knowledge (some inaccuracies are allowed) of the educational material of the component contained in the main and additional recommended literary sources, the ability to analyze the phenomena being studied in their interrelationship and development, clearly, succinctly, logically, consistently answer the questions, the ability to apply theoretical provisions when solving practical problems; 87–71 points – (“good”) is awarded for a generally correct understanding of the educational material of the component, including calculations, reasoned answers to the questions posed, which, however, contain certain (insignificant) shortcomings, for the ability to apply theoretical provisions when solving practical tasks; 70 – 50 points – (“satisfactory”) awarded for weak knowledge of the component’s educational material, inaccurate or poorly reasoned answers, with a violation of the sequence of presentation, for weak application of theoretical provisions when solving practical problems; 49-26 points - ("not certified" with the possibility of retaking the semester control) is awarded for ignorance of a significant part of the educational material of the component, significant errors in answering questions, inability to apply theoretical provisions when solving practical problems; 25-00 points - ("unsatisfactory" with mandatory re-study) is awarded for ignorance of a significant part of the educational material of the component, significant errors in answering questions, inability to navigate when solving practical problems, ignorance of the main fundamental provisions.
Recommended books: Навчально-методичне забезпечення
1. Методичні вказівки та рекомендації до самостійної та індивідуальної роботи студентів з дисципліни «САПР і конструювання пластмасових виробів та оснащення для їх формування» спеціальності 161. Хімічні технології та інженерія / Укл.: Гриценко О.М. – Львів: Видавництво Національного університету “Львівська політехніка”, 2023. – 33с.
2. Конструювання деталей з пластмас: Методичні вказівки до самостійної роботи з дисципліни «САПР і конструювання пластмасових виробів та оснащення для їх формування» / Укл. Цицанкіна Л.О., Скорохода В.Й. – Львів: Видавництво Національного університету “Львівська політехніка”, 2006. – 46с.
3. Розрахунок пластмасових деталей на міцність: Методичні вказівки до самостійної роботи з дисципліни „Конструювання пластмасових виробів і оснащення” для студентів спеціальності 161. Хімічні технології та інженерія / Укл.: Гриценко О.М. – Львів: Видавництво Національного університету “Львівська політехніка”, 2020. – 26с.
4. Розрахунок і конструювання формотвірних деталей оснащення для переробки пластмас: Методичні вказівки до самостійної роботи з дисципліни „Конструювання пластмасових виробів і оснащення для їх формування” для студентів спеціальності 7.091612 „Технологія переробки полімерів” / Укл.: Л.О.Цицанкіна. – Львів: Видавництво Національного університету „Львівська політехніка”, 2001. – 28 с.
5. Конструювання та розрахунок систем термостатування литтєвих форм: Методичні вказівки до виконання курсового та дипломного проектування для студентів спеціальності для студентів спеціальності 161. Хімічні технології та інженерія / Укл.: М.М. Братичак, В.Є. Левицький. – Львів: Національний університет “Львівська політехніка”, 2023. – 28 с.
Рекомендована література
Базова
1. Авраменко В. Л. Технологія виробництва та переробки полімерів медико-біологічного призначення : навч. посіб. / В. Л. Авраменко, Л. П. Підгорна, Г. М. Черкашина, О. В. Близнюк. – Харків: Видавництво та друкарня «Технологічний Центр», 2018. - 356 с.
2. Національний стандарт України ДСТУ 3627:2005. Вироби медичні. Розроблення і ставлення на виробництво. Основні положення. – Київ. – 2005
3. Матеріалознавство та конструкційні матеріали. Практикум: навч. посіб. для студ. спеціальності 163 «Біомедична інженерія»,для всіх спеціалізацій / І. Ю. Худецький, К. В. Ляпіна, Ю. В. Антонова-Рафі. -Київ : КПІ ім. Ігоря Сікорського, 2018. – 147 с.
4. Взаємозамінність, стандартизація та технічні вимірювання. Конспект лекцій для студентів всіх спеціальностей галузі знань «Механічна інженерія» всіх форм навчання. / Укл. А. П. Мартинов. - Краматорськ : ДДМА, 2019. - 170 с.
5. Набродов В.З. Допуски, посадки та технічні вимірювання: підруч. Для здобувачів професійної (професійно-технічної) освіти / В.З. Набродов. – Київ: Літера ЛТД, 2019. – 224с.
6. Сокольський О.Л. Проектування формуючих пристроїв обладнання для переробки пластмас: навч. посіб. / О.Л. Сокольський, В.І. Сівецький, І.О. Мікульонок. – К.: НТУУ «КПІ», 2014. – 130с.
7. Сівецький В.І., Сокольський О.Л., Сахаров О.С., Щербина В.Ю. Моделювання оснастки для формування полімерних виробів. – К.: НТУУ КПІ, 2006. – 131 с.
8. Колосова О. П. Моделювання процесів виготовлення реактопластичних композиційно-волокнистих матеріалів [конспект лекцій] / О. П. Колосова, В. В. Ванін, Г. А. Вірченко, О. Є. Колосов. – К.: ВПК «Політехніка» НТУУ «КПІ», 2016. – 164 с.
9. Robert A. Malloy. Plastic Part Design for Injection Molding 2E: An Introduction 2nd Edition. Hanser Publishers, Munich, 2010. 549p.
Допоміжна
1. Біоматеріли та біосумісність: навчальний посібник для студ. спеціальності 163 «Біомедична інженерія» / КПІ ім. Ігоря Сікорського: уклад. О.Я. Беспалова. – Київ : КПІ ім. Ігоря Сікорського, 2021. – 97 с.
2. Мельник О.С., Якименко Ю. Біомедичні матеріали: Навч. посібник. – К.: НТУУ «КПІ», 2000.-228 с.
3. Біосумісні матеріали для медичних виробів: навч. посіб. / І. В. Уварова, В. Б. Максименко. – Київ, Видавництво КІМ – 2013 – 231 С.
4. Спорягін, Е. О. Теоретичні основи та технологія виробництва полімерних композиційних матеріалів : навч. посіб. / Е. О. Спорягін, К. Є. Варлан. – Д. : Вид-во ДНУ, 2012. – 190с.
5. Колосов О.Є. Математичне моделювання базових процесів виготовлення полімерних композиційних матеріалів із застосуванням ультразвукової модифікації / Колосов О.Є., Сівецький В.І., Панов Є.М. та ін. – К.: ВД «Едельвейс», 2012. – 268 с.
6. Букетов А.В. Фізико-хімічні процеси при формуванні епоксикомпозитних матеріалів / А.В.Букетов., П.Д.Стухляк, Є.М.Кальба. ? Тернопіль: Збруч, 2005. ? 182 с.
7. Колосов О.Є. Формування полімерних композиційних матеріалів із застосуванням фізико-хімічної модифікації (у двох частинах). Частина 1. Дослідження передумов направленого здійснення фізико-хімічної модифікації / Колосов О.Є. ? К.: НТУУ ”КПІ”, 2005. ? 251 с.
Інформаційні ресурси
1. http://www.twirpx.com
2. http://chemistry-chemists.com
3. https://ua1lib.org/book/
3.http://www.polybum.com.
4. http://www.polymerbranch.com.
5. https://prototool.com/
6. https://www.bohler.at/export/en/plastic-mould/?gad_source=1&gclid=Cj0KCQjwlvW2BhDyARIsADnIe-J-bM3YSYST3ucEi7iCvG0gxymyPvrqa3ZfH7j3vyhx1Wbl4RgRagIaAgUHEALw_wcB
Уніфікований додаток: Lviv Polytechnic National University ensures the realization of the right of persons with disabilities to obtain higher education. Inclusive educational services are provided by the Service of accessibility to learning opportunities "Without restrictions", the purpose of which is to provide permanent individual support for the educational process of students with disabilities and chronic diseases. An important tool for the implementation of the inclusive educational policy at the University is the Program for improving the qualifications of scientific and pedagogical workers and educational and support staff in the field of social inclusion and inclusive education. Contact at:
St. Karpinsky, 2/4, 1st floor, room 112
E-mail: nolimits@lpnu.ua
Websites: https://lpnu.ua/nolimits https://lpnu.ua/integration
Академічна доброчесність: The policy regarding the academic integrity of the participants of the educational process is formed on the basis of compliance with the principles of academic integrity, taking into account the norms "Regulations on academic integrity at the Lviv Polytechnic National University" (approved by the academic council of the university on June 20, 2017, protocol No. 35).
Systems of Automated Design and Construction of Biomedical Products and Equipment for Their Manufacture (курсовий проєкт)
Major: Technologies of Orthopedic And Rehabilitation Products For Medical Purposes
Code of subject: 7.163.04.E.017
Credits: 3.00
Department: Chemical Technology of Plastics Processing
Lecturer: Associate Professor, Doctor of Technical Sciences, Grytsenko Oleksandr Mykolayovych
Semester: 2 семестр
Mode of study: денна
Завдання: The study of an educational discipline involves the formation of competencies in students of education:
integral competence: The ability to solve complex specialized tasks and practical problems in the field of orthopedic technology and engineering during professional activity or in the learning process, which involves conducting research and/or implementing innovations and is characterized by uncertainty of conditions and requirements.
general competences:
- KZ1. Ability to abstract thinking, analysis and synthesis.
- KZ2. Ability to search, process and analyze information from various sources.
- KZ3. Ability to identify, pose and solve problems.
- KZ4. Ability to work in a team.
- KZ5. Ability to work in an international context.
special competences:
- CS1. Ability to solve complex problems of biomedical engineering using methods of chemistry, mathematics, natural and engineering sciences. To design medical systems for various purposes and prostheses with qualitatively new indicators using new modern technologies.
- CS3. The ability to analyze complex medical-engineering and bioengineering problems and carry out their formalization to find quantitative solutions using modern mathematical methods and information technologies. To participate in research activities in solving engineering and scientific problems in the development of experimental models and samples of prosthetic and orthopedic products.
professional competences of a professional direction:
- FCS1.2. Ability to learn and apply new methods and tools for analysis, modeling, design and optimization of orthopedic and medical rehabilitation products.
- FCS1.3. The ability to master the skills of working with the most common computer program packages and use them to solve practical tasks in the field of professional activity.
- FCS 1.4. The ability to learn and apply new methods and tools of analysis, modeling and design for the fitting and adjustment of orthopedic and medical rehabilitation products for a specific user.
Learning outcomes: As a result of studying the academic discipline, the student must be able to demonstrate the following learning outcomes:
PR1. To design, construct and improve biotechnical systems and prosthetic and orthopedic products of various purposes in compliance with technical requirements, as well as to accompany their operation.
COM. Clear and unambiguous presentation of one's own knowledge, conclusions and arguments to specialists and non-specialists, in particular, to students.
AiV 1. Management of work or learning processes that are complex, unpredictable and require new strategic approaches.
AiV 2. Responsibility for the contribution to professional knowledge and practice and/or evaluation of the results of the activities of teams and collectives.
AiV 3. Ability to continue learning with a high degree of autonomy.
Required prior and related subjects: Multidisciplinary teams.
Human biomechanics.
Human pathology and rehabilitation
Research and modeling of prosthetic and orthotic systems.
Technology of prosthetics and limb orthoses.
Summary of the subject: During the implementation of the course project in the discipline "Systems of automated design and construction of products for biomedical purposes and equipment for their formation", students gain knowledge of the basics of designing plastic products for biomedical purposes and the construction of a forming tool for their manufacture.
Students complete the course project according to the general topic - "Development of technological process and equipment for the production of biomedical products". Output data – product for design, product material and manufacturing method are issued individually.
Опис: CONTENTS OF THE CALCULATION AND EXPLANATORY NOTE
Title page
Tasks for the course project
Sketch or operational drawing of the product
Content.
Introduction.
1. Analysis of the structural elements of a biomedical product when testing it for manufacturability.
2. Designing the technological process of manufacturing the product.
2.1 Analysis of competing methods and selection of a product manufacturing method.
2.2 Development of the technological scheme of product production.
2.3 Requirements for the technological properties of the processed material.
2.4 Justification and calculation of the main technological parameters of processing.
2.5 Waste disposal.
3. Design and calculation of technological equipment.
3.1 Development of the general equipment design.
3.2 Design of form-forming parts of equipment.
3.3 Development of functional equipment systems.
3.4 Thermal calculation of equipment.
3.5 Calculation of executive dimensions of form-forming elements.
4. Selection and calculation of the number of basic technological equipment.
4.1 Selection of the type of equipment and its technical characteristics.
4.2 Checking the possibility of installing equipment on the selected equipment.
4.3 Calculation of the amount of equipment.
Conclusions.
Literature.
Assessment methods and criteria: Public defense: listening to a report, answering questions; evaluation of the explanatory note, graphic material and presentation
Критерії оцінювання результатів навчання: Defense of the course project, final control - differential assessment.
Порядок та критерії виставляння балів та оцінок: 100–88 points – (“excellent”) is awarded for a high level of knowledge (some inaccuracies are allowed) of the educational material of the component contained in the main and additional recommended literary sources, the ability to analyze the phenomena being studied in their interrelationship and development, clearly, succinctly, logically, consistently answer the questions, the ability to apply theoretical provisions when solving practical problems; 87–71 points – (“good”) is awarded for a generally correct understanding of the educational material of the component, including calculations, reasoned answers to the questions posed, which, however, contain certain (insignificant) shortcomings, for the ability to apply theoretical provisions when solving practical tasks; 70 – 50 points – (“satisfactory”) awarded for weak knowledge of the component’s educational material, inaccurate or poorly reasoned answers, with a violation of the sequence of presentation, for weak application of theoretical provisions when solving practical problems; 49-26 points - ("not certified" with the possibility of retaking the semester control) is awarded for ignorance of a significant part of the educational material of the component, significant errors in answering questions, inability to apply theoretical provisions when solving practical problems; 25-00 points - ("unsatisfactory" with mandatory re-study) is awarded for ignorance of a significant part of the educational material of the component, significant errors in answering questions, inability to navigate when solving practical problems, ignorance of the main fundamental provisions.
Recommended books: Навчально-методичне забезпечення
1. Методичні вказівки та рекомендації до самостійної та індивідуальної роботи студентів з дисципліни «САПР і конструювання пластмасових виробів та оснащення для їх формування» спеціальності 161. Хімічні технології та інженерія / Укл.: Гриценко О.М. – Львів: Видавництво Національного університету “Львівська політехніка”, 2023. – 33с.
2. Конструювання деталей з пластмас: Методичні вказівки до самостійної роботи з дисципліни «САПР і конструювання пластмасових виробів та оснащення для їх формування» / Укл. Цицанкіна Л.О., Скорохода В.Й. – Львів: Видавництво Національного університету “Львівська політехніка”, 2006. – 46с.
3. Розрахунок пластмасових деталей на міцність: Методичні вказівки до самостійної роботи з дисципліни „Конструювання пластмасових виробів і оснащення” для студентів спеціальності 161. Хімічні технології та інженерія / Укл.: Гриценко О.М. – Львів: Видавництво Національного університету “Львівська політехніка”, 2020. – 26с.
4. Розрахунок і конструювання формотвірних деталей оснащення для переробки пластмас: Методичні вказівки до самостійної роботи з дисципліни „Конструювання пластмасових виробів і оснащення для їх формування” для студентів спеціальності 7.091612 „Технологія переробки полімерів” / Укл.: Л.О.Цицанкіна. – Львів: Видавництво Національного університету „Львівська політехніка”, 2001. – 28 с.
5. Конструювання та розрахунок систем термостатування литтєвих форм: Методичні вказівки до виконання курсового та дипломного проектування для студентів спеціальності для студентів спеціальності 161. Хімічні технології та інженерія / Укл.: М.М. Братичак, В.Є. Левицький. – Львів: Національний університет “Львівська політехніка”, 2023. – 28 с.
Рекомендована література
Базова
1. Авраменко В. Л. Технологія виробництва та переробки полімерів медико-біологічного призначення : навч. посіб. / В. Л. Авраменко, Л. П. Підгорна, Г. М. Черкашина, О. В. Близнюк. – Харків: Видавництво та друкарня «Технологічний Центр», 2018. - 356 с.
2. Національний стандарт України ДСТУ 3627:2005. Вироби медичні. Розроблення і ставлення на виробництво. Основні положення. – Київ. – 2005
3. Матеріалознавство та конструкційні матеріали. Практикум: навч. посіб. для студ. спеціальності 163 «Біомедична інженерія»,для всіх спеціалізацій / І. Ю. Худецький, К. В. Ляпіна, Ю. В. Антонова-Рафі. -Київ : КПІ ім. Ігоря Сікорського, 2018. – 147 с.
4. Взаємозамінність, стандартизація та технічні вимірювання. Конспект лекцій для студентів всіх спеціальностей галузі знань «Механічна інженерія» всіх форм навчання. / Укл. А. П. Мартинов. - Краматорськ : ДДМА, 2019. - 170 с.
5. Набродов В.З. Допуски, посадки та технічні вимірювання: підруч. Для здобувачів професійної (професійно-технічної) освіти / В.З. Набродов. – Київ: Літера ЛТД, 2019. – 224с.
6. Сокольський О.Л. Проектування формуючих пристроїв обладнання для переробки пластмас: навч. посіб. / О.Л. Сокольський, В.І. Сівецький, І.О. Мікульонок. – К.: НТУУ «КПІ», 2014. – 130с.
7. Сівецький В.І., Сокольський О.Л., Сахаров О.С., Щербина В.Ю. Моделювання оснастки для формування полімерних виробів. – К.: НТУУ КПІ, 2006. – 131 с.
8. Колосова О. П. Моделювання процесів виготовлення реактопластичних композиційно-волокнистих матеріалів [конспект лекцій] / О. П. Колосова, В. В. Ванін, Г. А. Вірченко, О. Є. Колосов. – К.: ВПК «Політехніка» НТУУ «КПІ», 2016. – 164 с.
9. Robert A. Malloy. Plastic Part Design for Injection Molding 2E: An Introduction 2nd Edition. Hanser Publishers, Munich, 2010. 549p.
Допоміжна
1. Біоматеріли та біосумісність: навчальний посібник для студ. спеціальності 163 «Біомедична інженерія» / КПІ ім. Ігоря Сікорського: уклад. О.Я. Беспалова. – Київ : КПІ ім. Ігоря Сікорського, 2021. – 97 с.
2. Мельник О.С., Якименко Ю. Біомедичні матеріали: Навч. посібник. – К.: НТУУ «КПІ», 2000.-228 с.
3. Біосумісні матеріали для медичних виробів: навч. посіб. / І. В. Уварова, В. Б. Максименко. – Київ, Видавництво КІМ – 2013 – 231 С.
4. Спорягін, Е. О. Теоретичні основи та технологія виробництва полімерних композиційних матеріалів : навч. посіб. / Е. О. Спорягін, К. Є. Варлан. – Д. : Вид-во ДНУ, 2012. – 190с.
5. Колосов О.Є. Математичне моделювання базових процесів виготовлення полімерних композиційних матеріалів із застосуванням ультразвукової модифікації / Колосов О.Є., Сівецький В.І., Панов Є.М. та ін. – К.: ВД «Едельвейс», 2012. – 268 с.
6. Букетов А.В. Фізико-хімічні процеси при формуванні епоксикомпозитних матеріалів / А.В.Букетов., П.Д.Стухляк, Є.М.Кальба. ? Тернопіль: Збруч, 2005. ? 182 с.
7. Колосов О.Є. Формування полімерних композиційних матеріалів із застосуванням фізико-хімічної модифікації (у двох частинах). Частина 1. Дослідження передумов направленого здійснення фізико-хімічної модифікації / Колосов О.Є. ? К.: НТУУ ”КПІ”, 2005. ? 251 с.
Інформаційні ресурси
1. http://www.twirpx.com
2. http://chemistry-chemists.com
3. https://ua1lib.org/book/
3.http://www.polybum.com.
4. http://www.polymerbranch.com.
5. https://prototool.com/
6. https://www.bohler.at/export/en/plastic-mould/?gad_source=1&gclid=Cj0KCQjwlvW2BhDyARIsADnIe-J-bM3YSYST3ucEi7iCvG0gxymyPvrqa3ZfH7j3vyhx1Wbl4RgRagIaAgUHEALw_wcB
Уніфікований додаток: Lviv Polytechnic National University ensures the realization of the right of persons with disabilities to obtain higher education. Inclusive educational services are provided by the Service of accessibility to learning opportunities "Without restrictions", the purpose of which is to provide permanent individual support for the educational process of students with disabilities and chronic diseases. An important tool for the implementation of the inclusive educational policy at the University is the Program for improving the qualifications of scientific and pedagogical workers and educational and support staff in the field of social inclusion and inclusive education. Contact at:
St. Karpinsky, 2/4, 1st floor, room 112
E-mail: nolimits@lpnu.ua
Websites: https://lpnu.ua/nolimits https://lpnu.ua/integration
Академічна доброчесність: The policy regarding the academic integrity of the participants of the educational process is formed on the basis of compliance with the principles of academic integrity, taking into account the norms "Regulations on academic integrity at the Lviv Polytechnic National University" (approved by the academic council of the university on June 20, 2017, protocol No. 35).