Verification of Measuring Means

Major: Information Technologies in Instrument Engineering
Code of subject: 7.152.05.O.001
Credits: 6.00
Department: Measuring Information Technologies
Semester: 1 семестр
Mode of study: денна

Verification of Measuring Means

Major: Information Technologies in Instrument Engineering
Code of subject: 7.152.05.O.002
Credits: 6.00
Department: Department of Intelligent Mechatronics and Robotics
Lecturer: Orest Ivakhiv
Semester: 1 семестр
Mode of study: денна
Learning outcomes: Learning outcomes in accordance with the educational program, learning and teaching methods, methods of evaluating the achievement of learning outcomes As a result of studying the academic discipline, the student must be able to demonstrate the following learning outcomes: - the ability to analyze the conditions of conducting a measurement experiment for the verification of the FTA, to choose the appropriate method and means of measurement and to conduct a measurement experiment for the verification of the FTA; - the ability to process the experimental data of the verification of the FTA, to draw a conclusion about the compliance of the FTA with the requirements of the ND, which regulate its metrological characteristics, and to draw up the relevant documents; - the ability to evaluate the accuracy of the results of FTA verification in order to establish their reliability
Required prior and related subjects: Previous academic disciplines 1 Basics of metrology and measuring technology 1 Metrological support of production 2 Methods and means of measuring electrical quantities 2 Design of measuring devices 3 Methods and means of measuring non-electric quantities 4 Processing of measurement results 5 Analog and digital measuring devices related and subsequent academic disciplines 1 Metrological support of production 2 Design of measuring devices
Summary of the subject: The discipline "Verification of measuring equipment" is one of the main mandatory professional disciplines of professional and practical master's training in specialty 152 "Metrology and information and measuring equipment". The purpose of teaching the discipline is for students to study modern methods and means of verification (metrological verification) of measuring equipment (MET), to acquire the ability to conduct a measuring experiment and to process its results in order to establish the conformity of the tested MT to the requirements of regulatory documents (ND) and its suitability for use . The discipline "Verification of measuring equipment" consists of a lecture course, a laboratory workshop, calculation work (for full-time students) and control work (for part-time students). The structure of the course "Verification of measuring equipment" and its teaching methodology are aimed, first of all, at the consideration of issues that are common to the verification of various types of METs intended for the measurement of various types of quantities of both electrical and non-electrical nature, as well as issues related to the calibration of METs: ¦ study and analysis of FTA verification methods, since the same method can be used to verify different types of FTA. For example, by the method of direct comparison of the tested test equipment with the reference one, the verification of direct evaluation measuring devices intended for measuring both electrical quantities - ammeters, voltmeters, wattmeters, etc., and non-electrical quantities - liquid and gas flow meters, manometers, viscometers, etc. .; ¦ study and analysis of measurement methods, since the same method of FTA verification can be implemented by using different measurement methods, which determines the methodology of processing FTA verification results and assessing their accuracy. For example, the method of comparing the FTA under test with the reference one with the help of a comparator can be implemented by using such measurement methods as the substitution method, the contrast method, the differential and zero methods; ¦ assessment of the accuracy of the results of the verification of the FTA and their reliability is carried out according to the method of calculating the uncertainty (uncertainty) of the measurement result in the procedure of verification and calibration of the FTA, which is calibrated, which corresponds to the modern trends in the development of world metrology. The material of the course "Verification of measuring equipment" can be used by students in the process of completing master's qualification works.
Assessment methods and criteria: Maximum score in points Current control (PC): 40 points Examination control (written part): 50 points Examination control (oral part):10 points Total for the discipline: 100 points
Recommended books: 1. Guide to the Expression of Uncertainty in Measurement (GUM): First edition. — ISO. 1993. - 101 р. 2. Метрологія. Застосування «Вказівок до подання непевності вимірювань»: ДСТУН РМГ 432006. [Чинний від 2007.01]. Київ: Держстандарт України, 2006. - 34 с. (Національний стандарт України). 3. Обозовський С.С. Теоретичні основи інформаційновимірювальної техніки / С.С. Обозовський // – Київ: НМК ВО, 1991. - 223 с. 4. Новицкий П.В. Оценка погрешностей результатов измерений / П.В. Новицкий, И.А. Зограф // Монография. Ленинград: Энергоатомиздат, 1991. – 304 с. 5. Володарский Є. Статистична обробка даних: Навч. посіб. / Є.Т. Володарский, Л.О. Кошевая // – Київ: НАУ, 2008. – 308 с. 6. Дж.Бендат, А.Пирсол. Прикладной анализ случайных данных – Москва: Мир, 1989. – 340 с. 7. Е.И.Пустильник. Статистические методы анализа и обработки наблюдений. – Москва: Наука, 1968. – 288 с. 8. Ван дер Ванден Б.Л. Математическая статистика. – Москва: Издательство иностранной литературы, 1960. – 340 с. 9. Орнатский П.П. Теоретические основы информационно измерительной техники / П. Орнатский // Киев: Вища школа, 1983. - 455 с. 10. Дорожовець М.М. Опрацювання результатів вимірювань / М. Дорожовець // Навч. посібник. – Львів: Видавництво Національного університету «Львівська політехніка», 2007. –624 с. 11. Davis J. ASM International. Tensile Testing, Second Edition / Edited by J.R. Davis // Materials Park, Ohio, USA, 2004. 279 р. 12. D 638 Test Method for Tensile Properties of Plastics. Annual Book of ASTM Standards, 2004. Vol 08.01. [Електронний ресурс] Режим доступу: http://classes.engr.oregonstate.edu/mime/winter2012/me453001/Lab1%20 %20Shear%20Strain%20on%20Polymer%20Beam/ASTM%20D63802a.pdf. 32 13. Бубела Іванна Василівна. Опрацювання результатів вимірювання при відхиленні їх статистичних властивостей від типових. Дисертація на здобуття наукового ступеня кандидата технічних наук за спеціальністю 05.01.02 – стандартизація, сертифікація та метрологічне забезпечення (УДК 006.91: 621.317) – Львів: 2016 14. Пономарьов П. Безпека харчових продуктів та продовольчої сировини: Навчальний посібник / Пономарьов П.X., Сирохман І.В. // К.: Лібра, 1999. 272 с. 15. Столярчук П. Упровадження систем контролю молочної продукції — запорука її якості та безпечності / П. Столярчук, О. Малик // Стандартизація, сертифікація, якість, 2011. — № 6. — с. 61 64. 16. Черевко О.І. Методи контролю якості харчової продукції: Навч. посібник для студ. вищих навч, закл. технол. спец. / О.І. Черевко, Л.М. Крайнюк, Л.О. Касілова, Л.Р. Димитрієвич, Ж.А. Крутовий, Л.Г. Зіборова. — Харків: ХДУХТ, 2005. — 230 с. 17. Попова Н.В. Контроль якості та безпеки продукції галузі / Попова Н.В., Мисюра Т.Г. // Курс лекцій для студ. напряму 6.051701 "Харчові технології та інженерія" ден. та заоч. форм навч. — К.: НУХТ, 2012. — 176 с. [Електронний ресурс] Режим доступу: http://library.nuft.edu.ua/ebook/file/102.02.pdf. 18. Gumbel E. Statistics of Extremes / E. J. Gumbel // New York: Columbia University Press, 1958. – 375 р. 19. Дорожовець М. Опрацювання результатів спостереження на основі наближеного методу порядкових статистик / М. Дорожовець, І. Попович // Вимірювальна техніка та метрологія. 2014. № 75. – с. 812.