Reconstruction and Repair Works of the Oil and Gas Complex

Major: Oil and Gas Engineering and Technology
Code of subject: 6.185.01.E.083
Credits: 4.50
Department: Department of Oil and Gas Engineering and Welding
Lecturer: Voitovich A. A
Semester: 6 семестр
Mode of study: денна
Learning outcomes: Knowledge of engineering methods of calculation and selection, scope of classical and modern designs of machines, assemblies, mechanisms, parts, welding processes used in modern oil and gas technologies and engineering. (ZN 1). Ability to perform calculations in the design of elements and components, taking into account advanced technological processes (UM 11).
Required prior and related subjects: Previous disciplines 1. Construction of main pipelines 2. Basics of oil and gas business Related and subsequent disciplines 1. Quality control of oil and gas facilities
Summary of the subject: During the study of this discipline the student acquires theoretical and practical knowledge on the restoration of parts of machines of the oil and gas complex; gets acquainted with the basic technologies of repair; studies materials used to restore parts of oil and gas complex machines; acquires the ability to practically implement the theoretical knowledge obtained in the choice of techniques and technologies for welding steels in the repair of parts of machines of the oil and gas complex.
Assessment methods and criteria: Defense of practical works (20 points); Protection of laboratory works (20 points); Current Express - control (60 points). Criteria for assessing the knowledge and skills of the student based on the results of studying the study material of the module in the 100-point scale and the ECTS scale: • 100-88 points - grade A ("excellent") is given for a high level of knowledge (some inaccuracies are allowed) of the training material of the module contained in the main and additional recommended literature sources, the ability to analyze the studied phenomena in their relationship and development, clearly, concisely, logically, consistently answer questions, the ability to apply theoretical principles in solving practical problems; • 87–80 points - grade B (“very good”) is given for knowledge of the training material of the module above the average level, including calculations, reasoned answers to questions (a small number of inaccuracies), the ability to apply theoretical principles in development. solving practical tasks; • 79–71 points - grade C (“good”) is given for the general correct understanding of the training material of the module, including calculations, reasoned answers to the questions, which, however, contain certain (insignificant) shortcomings, for the ability to apply theoretical provisions in solving practical problems; • 70–61 points - grade D (“indirectly”) is given for mediocre knowledge of the training material of the module, poorly reasoned answers, poor application of theoretical principles in solving practical problems; - 60-50 points - grade E ("satisfactory") is given for poor knowledge of the training material of the module, inaccurate or poorly reasoned answers, with a violation of the sequence of presentation, for poor application of theoretical principles in solving practical problems; • 49–26 points - FX grade (“unsatisfactory”) with the possibility of retake the exam or test) is set for ignorance of a significant part of the training material of the module, significant errors in answering questions, inability to apply theoretical principles in solving practical tasks; • 25–00 points - grade F (“unsatisfactory”) with obligatory re-study of the module) is set for ignorance of a significant part of the study material of the module, significant errors in answering questions, inability to navigate during the solution practical tasks, ignorance of the basic fundamentals.
Recommended books: Базова 1. Дзюбик А. Р. Метали та зварювання в будівництві: навч. посібник / А. Р. Дзюбик, І. Б. Хомич – Львів, Дрогобич: Посвіт, 2018. – 238 с. - ISBN 978-617-7624-74-4. 2. Кузін О. А. Металознавство і термічна обробка металів / О. А. Кузін, Р. Яцюк. – К. : Основа, 2005. – 360 с. - ISBN: 966-7760-36-7 3. Жизняков С. Н. Ручная дуговая сварка. Материалы. Оборудование. Технология. / С. Н. Жизняков, З. А. Сидлин – К.: „Екотехнологія”, 2006. – 368 с. - ISBN 978-5-903248-01-8 Допоміжна 1. Дзюбик А. Р. Підвищення ефективності зварювання магістральних трубопроводів при їх експлуатації та ремонті: монографія / А.Р.Дзюбик, І.Б.Назар, Р.В.Палаш. - Львів: Сполом, 2013. 258с. – ISBN 978-966-665-872-5. 2. Биковсъкий О. Г. Довідник зварника / О. Г. Биковсъкий, I. В. Пінь-ковський – К.: Техніка, 2002. – 336 с. - ISBN 966-575-168-9. 3. Назар І. Б. Технологічні процеси відновлення деталей машин та аг-регатів: навч. посібник / І. Б. Назар, А. Р. Дзюбик, А. А. Войтович. – Дрого-бич: Посвіт, 2020. – 204 с. – ISBN 978-917-7835-51-5. 9. Інформаційні ресурси 1. Дзюбик А. Р. Метали та зварювання в будівництві: навч. посібник ВНС НУЛП [Електронний ресурс] / Дзюбик А. Р., Хомич І. Б. - реєстр. номер № Е41-177-56/2017 від 03.04.2017 р. – Режим доступу: http://vns.lpnu.ua/course/view.php?id=1475

Reconstruction and Repair Works of the Oil and Gas Complex (курсова робота)

Major: Oil and Gas Engineering and Technology
Code of subject: 6.185.01.E.085
Credits: 2.00
Department: Department of Oil and Gas Engineering and Welding
Lecturer: Voitovich A. A
Semester: 6 семестр
Mode of study: денна
Learning outcomes: Knowledge of engineering methods of calculation and selection, scope of classical and modern designs of machines, assemblies, mechanisms, parts, welding processes used in modern oil and gas technologies and engineering. (ZN 1). Ability to perform calculations in the design of elements and components, taking into account advanced technological processes (UM 11).
Required prior and related subjects: Previous disciplines 1. Construction of main pipelines 2. Basics of oil and gas business Related and subsequent disciplines 1. Quality control of oil and gas facilities
Summary of the subject: During the study of this discipline the student acquires theoretical and practical knowledge on the restoration of parts of machines of the oil and gas complex; gets acquainted with the basic technologies of repair; studies materials used to restore parts of oil and gas complex machines; acquires the ability to practically implement the theoretical knowledge obtained in the choice of techniques and technologies for welding steels in the repair of parts of machines of the oil and gas complex.
Assessment methods and criteria: defense of course work 100 points Criteria for assessing the knowledge and skills of the student based on the results of studying the study material of the module in the 100-point scale and the ECTS scale: • 100-88 points - grade A ("excellent") is given for a high level of knowledge (some inaccuracies are allowed) of the training material of the module contained in the main and additional recommended literature sources, the ability to analyze the studied phenomena in their relationship and development, clearly, concisely, logically, consistently answer questions, the ability to apply theoretical principles in solving practical problems; • 87–80 points - grade B (“very good”) is given for knowledge of the training material of the module above the average level, including calculations, reasoned answers to questions (a small number of inaccuracies), the ability to apply theoretical principles in development. solving practical tasks; • 79–71 points - grade C (“good”) is given for the general correct understanding of the training material of the module, including calculations, reasoned answers to the questions, which, however, contain certain (insignificant) shortcomings, for the ability to apply theoretical provisions in solving practical problems; • 70–61 points - grade D (“indirectly”) is given for mediocre knowledge of the training material of the module, poorly reasoned answers, poor application of theoretical principles in solving practical problems; - 60-50 points - grade E ("satisfactory") is given for poor knowledge of the training material of the module, inaccurate or poorly reasoned answers, with a violation of the sequence of presentation, for poor application of theoretical principles in solving practical problems; • 49–26 points - FX grade (“unsatisfactory”) with the possibility of retake the exam or test) is set for ignorance of a significant part of the training material of the module, significant errors in answering questions, inability to apply theoretical principles in solving practical tasks; • 25–00 points - grade F (“unsatisfactory”) with obligatory re-study of the module) is set for ignorance of a significant part of the study material of the module, significant errors in answering questions, inability to navigate during the solution practical tasks, ignorance of the basic fundamentals.
Recommended books: Базова 1. Дзюбик А. Р. Метали та зварювання в будівництві: навч. посібник / А. Р. Дзюбик, І. Б. Хомич – Львів, Дрогобич: Посвіт, 2018. – 238 с. - ISBN 978-617-7624-74-4. 2. Кузін О. А. Металознавство і термічна обробка металів / О. А. Кузін, Р. Яцюк. – К. : Основа, 2005. – 360 с. - ISBN: 966-7760-36-7 3. Жизняков С. Н. Ручная дуговая сварка. Материалы. Оборудование. Технология. / С. Н. Жизняков, З. А. Сидлин – К.: „Екотехнологія”, 2006. – 368 с. - ISBN 978-5-903248-01-8 Допоміжна 1. Дзюбик А. Р. Підвищення ефективності зварювання магістральних трубопроводів при їх експлуатації та ремонті: монографія / А.Р.Дзюбик, І.Б.Назар, Р.В.Палаш. - Львів: Сполом, 2013. 258с. – ISBN 978-966-665-872-5. 2. Биковсъкий О. Г. Довідник зварника / О. Г. Биковсъкий, I. В. Пінь-ковський – К.: Техніка, 2002. – 336 с. - ISBN 966-575-168-9. 3. Назар І. Б. Технологічні процеси відновлення деталей машин та аг-регатів: навч. посібник / І. Б. Назар, А. Р. Дзюбик, А. А. Войтович. – Дрого-бич: Посвіт, 2020. – 204 с. – ISBN 978-917-7835-51-5. 9. Інформаційні ресурси 1. Дзюбик А. Р. Метали та зварювання в будівництві: навч. посібник ВНС НУЛП [Електронний ресурс] / Дзюбик А. Р., Хомич І. Б. - реєстр. номер № Е41-177-56/2017 від 03.04.2017 р. – Режим доступу: http://vns.lpnu.ua/course/view.php?id=1475